Invader II E642II

Can an extremely successful amp such as the INVADER be further improved? That’s fine! If you are on the hunt for sound, the Invader II gives you a flexible variety that is second to none. A whopping number of 16 (!) Sounds are the base for extensive excursions into your own sound worlds. Optionally, the INVADER offers the Sound Wizard Module (SWM Z16). There is already a slot on the back and a connection port installed. With 96 micro rocker switches, the sound can be comprehensively influenced in every Channel and in every gainsetting - for all “Tone Hunters” a dream comes true! Who wonders where the 16 basic sounds come from: four channels each with low gain and hi gain as well as sound switch, makes 16! This sound invasion is of course controllable via MIDI. A 3-Band EQ per Channel, Noise Gate and comprehensive peripheral connections are understood in such a sound monster itself!

Features
  • 4 Channels: Clean, Crunch, Lead 1, Lead 2
  • All Tube Head
  • 2 Tube buffered FX Loops (each with Balance control)
  • Noise Gate
  • Master A/B
  • Power Tube Monitor
  • Connection Port for the optional ENGL Z16 Sound Wizzard Module
  • Ground Lift Switch
  • MIDI: MIDI in / MIDI thru
  • Engl Midi-Footcontroller Phantom Power Switch
  • MIDI Channel Assignment and Controller Enable Switches
  • Write / Copy (for MIDI programming)
  • all functions accessible on the front panel are MIDI programmable
  • S.A.C.: Serial Amp Control
Sound Options
  • Sound
  • Hi Gain
  • Sound Wizzard Module (optional)
Controls
  • Gain (for each Channel)
  • 3-Band EQ (for each Channel)
  • Volume (for each Channel)
  • Presence
  • Depth Punch
  • Master A
  • Master B
  • Noise Gate Threshold Level
  • Low / High Gain Volume Ratio Control (for each Channel)
  • FX Loop I Balance
  • FX Loop II Balance
Outputs
  • Poweramp Output (1 x 4 Ω, 1 x 8 Ω, 1 x 16 Ω, 2 x 8 Ω ||, 2 x 16 Ω ||) - Pre Output - Line Out
Footswitch
  • Z4 (Channels)
  • Z9 (Master A/B, Hi Gain, Noise Gate, Amp Mute, Sound, FX Loop)
  • Z12
  • Z15
Preamp Tubes 4 x Engl ECC83 / 12AX7
Output Tubes 4 x Engl EL34
Output Wattage 100W
Dimensions 71 x 27 x 29 cm
Weight 22.5 kg
Manuals Manual Icon English Manual Icon German